HOME 〉 PRODUCTS 〉 LCR Standard 〉 tanδ(Dissipation Factor)Standard   TYPE 6270A

tanδ(Dissipation Factor)Standard   TYPE 6270A

tanδ(Dissipation Factor)Standard             TYPE 6270A tanδ(Dissipation Factor)Standard             TYPE 6270A

  6270A Series are highly stable tanδ(Dissipation Factor)standards which are made of ceramic capacitance and accurate resistor. tanδ(Dissipation Factor)calibration can be made at 120Hz and 1kHz by switching.

Features

  • Capacitance 1 pF ~ 100 μF available.
  • Excellent accuracy, temperature coefficient and long term stability make  6250B suitable for calibration standard.
  • Direct connection to LCR can be made due to 4-terminal construction.
  • OPEN or SHORT correction can be made while connected to LCR.
  • Capacitance and dissipation factor can be selected

Specifications

Item/ModelTYPE 6270A
Used Frequency120 Hz
1 kHz
Nominal tanδ(%)0 %,0.1 %,0.5 %,1.0 %,5.0 %,10% 15 %, 30 %,100 %,150 %,300 %
Total 11 points
0 %,1.0 %,5.0 %,10 %,50 %,100 % 150 %,300 %
Total 8 points
tanδ Accuracy
Converted to set tanδ Less Than ±0.1 %(tanδ Less Than 100 %)
Capacitance1.326 μF1.592 μF
Capacitance Tolerance±0.1 %
Temperature Coefficient±50 ppm/℃
Stability
±100 ppm/Year
Max. Applied Voltage/Current
Less Than 50 Vdc(15 Vac)/ 150 mA

Dimension(W×D×H)mm
140mm×102mm×105mm(Including rubber feet)

Weight
Approx. 600 g

  • Specifications are subject to change without notice due to improvement
  • SunJEM will design products to meet your individual requirements.
    Please feel free to consult with us for products other than ready-made ones.